Second Hand Girbau SPR-50 Membrane Press – 50 kg, 40 bar, Reconditioned
This second hand Girbau SPR-50 Membrane Press is designed for efficient mechanical water extraction in professional and industrial laundry operations.
The Girbau SPR-50 has a nominal dry linen capacity of 50 kg and is designed to remove a high percentage of residual moisture from washed textiles before drying or ironing. The press can apply pressure of up to 40 bar, helping to reduce the moisture load entering downstream drying processes and improve overall laundry efficiency. Girbau designed the SPR-50 specifically for integration into high-volume industrial laundry systems.
The SPR-50 uses a large pressing chamber with a 1,000 mm pressing diameter and a hydraulic membrane system for controlled water extraction. The machine is designed for both efficient extraction and careful textile treatment, with programmable pressing parameters and a water recovery system using two pumps.
This particular Girbau SPR-50 has been reconditioned in the workshop, where it was thoroughly tested and worn parts were replaced where necessary. It is therefore suitable for professional laundries looking for a reliable membrane press for high-volume textile processing.
Machine details:
Manufacturer: Girbau
Model: SPR-50
Machine type: Membrane Press / Water Extraction Press
Loading capacity: 50 kg dry laundry per charge
Maximum pressing pressure: 40 bar
Pressing diameter: 1,000 mm
Recovery pumps: 2
Recovery pump flow: Approximately 12 m³/h
Minimum cycle time: Approximately 100 seconds
Electrical power: Approximately 16.5 kVA
Extraction process: Mechanical membrane pressing
Process stage: After washing and before drying or ironing
Water recovery: Integrated recovery system
Application: Professional / industrial laundry
Suitable textiles: Bed linen, towels, workwear, hotel textiles, hospital textiles and other washable textiles
Condition: Used / Second Hand
Reconditioning: Workshop reconditioned and tested
Goudkuil number: 0000475
This second hand Girbau SPR-50 Membrane Press is a practical solution for professional laundries looking to improve mechanical water extraction and reduce the drying load after washing.
Would you like more information about this Girbau SPR-50 Membrane Press or its current availability? Please contact Goudkuil for more information.
Girbau SPR-50 information
| id | Specification | Details |
|---|---|---|
| 1 | Manufacturer | Girbau |
| 2 | Model | SPR-50 |
| 3 | Machine type | Membrane Press / Water Extraction Press |
| 4 | Nominal dry linen capacity | 50 kg per charge |
| 5 | Maximum pressing pressure | 40 bar |
| 6 | Pressing diameter | 1,000 mm |
| 7 | Minimum pressing time | 30 seconds |
| 8 | Minimum cycle time | 90 seconds |
| 9 | Recovery pumps | 2 |
| 10 | Recovery pump flow | 12 m³/h |
| 11 | Water recovery | Integrated water recovery system |
| 12 | Programmable pressure time | Yes |
| 13 | Unloading configuration | In-line or angled depending on configuration |
| 14 | Extraction process | Mechanical membrane pressing |
| 15 | Process stage | After washing and before drying |
| 16 | Electrical power installed | 16.5 kVA |
| 17 | Installed weight | Approximately 12,600 kg |
| 18 | Application | Professional / industrial laundry |
| 19 | Suitable textiles | Bed linen, towels, workwear, hotel textiles, hospital textiles and other washable textiles |
| 20 | System integration | Suitable for integration with tunnel washing systems |
| 21 | Condition | Used / Second Hand |
| 22 | Reconditioning | Workshop reconditioned and tested |
The information contained in this table is provided for general informational purposes only and does not confer any rights or create any legally binding obligations.
Girbau SPR-50 information (click)
| id | Specification | Details |
|---|---|---|
| 1 | Manufacturer | Girbau |
| 2 | Model | SPR-50 |
| 3 | Machine type | Membrane Press / Water Extraction Press |
| 4 | Nominal dry linen capacity | 50 kg per charge |
| 5 | Maximum pressing pressure | 40 bar |
| 6 | Pressing diameter | 1,000 mm |
| 7 | Minimum pressing time | 30 seconds |
| 8 | Minimum cycle time | 90 seconds |
| 9 | Recovery pumps | 2 |
| 10 | Recovery pump flow | 12 m³/h |
| 11 | Water recovery | Integrated water recovery system |
| 12 | Programmable pressure time | Yes |
| 13 | Unloading configuration | In-line or angled depending on configuration |
| 14 | Extraction process | Mechanical membrane pressing |
| 15 | Process stage | After washing and before drying |
| 16 | Electrical power installed | 16.5 kVA |
| 17 | Installed weight | Approximately 12,600 kg |
| 18 | Application | Professional / industrial laundry |
| 19 | Suitable textiles | Bed linen, towels, workwear, hotel textiles, hospital textiles and other washable textiles |
| 20 | System integration | Suitable for integration with tunnel washing systems |
| 21 | Condition | Used / Second Hand |
| 22 | Reconditioning | Workshop reconditioned and tested |
The information contained in this table is provided for general informational purposes only and does not confer any rights or create any legally binding obligations.
Related products
-
Second Hand Kannegiesser Ironer Line – 1 Roll, 2000 mm × 3000 mm
-
Pre-Owned Kannegiesser PT 50-16 PowerTrans Tunnel Washer – 16 Compartments, 50 kg
-
Pre-Owned Kannegiesser PT 50-12 Tunnel Washer – 12 Compartments, 50 kg, Press & Steam Heated Dryer
-
Second Hand Kannegiesser PT 40-11 Tunnel Washer – 40 kg, 11 Compartments, Press & 2 Dryers